Is that really needed, I was able to get it out without a problem..
Is the tranny cooler in the radiator or does it have a separate one? The main reasone I didn't pull the rad was because I assumed I would need to uncouple the tranny cooler lines, but I never really looked at it I was just getting the motor out..


I was planning on installing the plenum supports outside the truck but what is this cable clamp, are you refering to the thing holding down the wire loom? If so, then yeah I was planning on doing that as well, but thanks for the pointers. If the cable clamp you are refering to is not the one for the wire loom on the pasenger side then please explain it a little more for me.