Bearing Race Upside Down

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Bearing Race Upside Down #647618 09/16/05 10:55 PM

Anonymous

Unregistered

Ok well I am working on my front end today and stupid me I tapped the race in upside down into the knuckle. How should I go about getting it out now? Can I heat the surrounding area up and see if I can get it to slide out or what?

Last edited by ADyingDevotion; 09/16/05 10:56 PM.

Entire Thread
Subject	Posted By	Posted
Bearing Race Upside Down	Anonymous	09/16/05 10:55 PM
Re: Bearing Race Upside Down	4mudder	09/17/05 02:38 AM
Re: Bearing Race Upside Down	CraShYota	09/17/05 02:40 AM
Re: Bearing Race Upside Down	Anonymous	09/17/05 11:05 AM
Re: Bearing Race Upside Down	CraShYota	09/17/05 02:00 PM
Re: Bearing Race Upside Down	smansfield	09/17/05 02:13 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 15 (3.514s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-17 16:07:32 UTC
Valid HTML 5 and Valid CSS