|
|
|
|
 Front Range Bumper on 1st Gen
#647887
09/18/05 03:32 AM
|
Joined: Jan 2005
Posts: 199
OP
Wheeler
|
Has anyone put the frontrange bumper on a 1st gen pickup? From the pics I have seen, the front crossmember on the 84 and up trucks is right at the end of the frame rails, while on my '83 the crossmember is recessed about 1.5". I'm pretty sure that it can be done without too much trouble, but is there anything I should watch out for? I already ordered their $39 frame brace so I could get it welded in before I order the bumper.
83 4x4, 3" Lift, 33" Buckshot Mudders
|
|
|
Re: Front Range Bumper on 1st Gen
[Re: coryc85]
#647888
09/19/05 03:27 PM
|
Joined: Nov 2000
Posts: 4,192
Toyota Moderator
|
They don't show an application for your truck on their website, but call Brian Ellinger at FROR and ask him how much work it would take to fit. He may just not list it because it is not a bolt on and he doesn't want complaints.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5842 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-17 15:22:54 UTCValid HTML 5 and Valid CSS 
