Front Range Bumper on 1st Gen

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Front Range Bumper on 1st Gen #647887 09/18/05 03:32 AM

Joined: Jan 2005

Posts: 199

South FL

coryc85

Wheeler

Has anyone put the frontrange bumper on a 1st gen pickup? From the pics I have seen, the front crossmember on the 84 and up trucks is right at the end of the frame rails, while on my '83 the crossmember is recessed about 1.5". I'm pretty sure that it can be done without too much trouble, but is there anything I should watch out for? I already ordered their $39 frame brace so I could get it welded in before I order the bumper.

83 4x4, 3" Lift, 33" Buckshot Mudders

Entire Thread
Subject	Posted By	Posted
Front Range Bumper on 1st Gen	coryc85	09/18/05 03:32 AM
Re: Front Range Bumper on 1st Gen	DirtyHarry	09/19/05 03:27 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.503s Queries: 15 (3.501s) Memory: 0.5939 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-20 07:47:45 UTC
Valid HTML 5 and Valid CSS