CEL reset? '95 Rodeo 2.6L 2WD

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

CEL reset? '95 Rodeo 2.6L 2WD #648342 09/19/05 06:34 PM

Joined: Dec 2004

Posts: 287

Houston, Texas in 2007

islandracer Offline

Mudrunner

Tried the search but, can't get anything on how to reset CEL on the 2.6L. I found alot of CEL stuff covering the V6 though...

I tried disconnecting the battery for 5 mins and the light still comes on...
Also, where do I find the diognostic wires to retrieve codes?

New to the EFI stuff, so please excuse the lack of intel.

Thanks!

B.Y.E. ~ Back Yard Engineering

Entire Thread
Subject	Posted By	Posted
CEL reset? '95 Rodeo 2.6L 2WD	islandracer	09/19/05 06:34 PM
Re: CEL reset? '95 Rodeo 2.6L 2WD	CPOM	09/19/05 08:34 PM
Re: CEL reset? '95 Rodeo 2.6L 2WD	islandracer	09/19/05 10:19 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.555s Queries: 15 (3.552s) Memory: 0.5968 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-07-13 06:51:35 UTC
Valid HTML 5 and Valid CSS