making Yota pinion bearing separator from scratch....sort of.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Early Toyota Trucks making Yota pinion bearing separator from scratch....sort of.

Print Thread

Rate Thread

Re: making Yota pinion bearing separator from scratch....sort of. [Re: ZUK] #648445 09/20/05 06:12 PM

Anonymous

Unregistered

They were in a Yukon box so I'm not sure. the pinion had waxy goop on it I had to clean off if that means anything. and yep I preloaded the carrier bearing as per instructions(yours). looking at pictures sure helps, thanks

And now Back to the regularly scheduled Topic <img src="/forums/images/graemlins/smile.gif" alt="" />.......Karl

Entire Thread
Subject	Posted By	Posted
making Yota pinion bearing separator from scratch....sort of.	ZUK	09/20/05 12:46 AM
Re: making Yota pinion bearing separator from scratch....sort of.	Anonymous	09/20/05 02:22 PM
Re: making Yota pinion bearing separator from scratch....sort of.	ZUK	09/20/05 05:28 PM
Re: making Yota pinion bearing separator from scratch....sort of.	Anonymous	09/20/05 06:12 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.805s Queries: 16 (3.803s) Memory: 0.5963 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-06-09 02:37:01 UTC
Valid HTML 5 and Valid CSS