pull n save diffs versus rebuilt

Print Thread

Rate Thread

Re: pull n save diffs versus rebuilt [Re: Red_Chili] #648582 09/20/05 10:43 PM

Joined: Oct 2003

Posts: 116

N39 32.872 W104 58.755

Seldom_Seen Offline

Wheeler

I've got a Toy 4.88 NON ABS diff that I've torn down and cleaned up. I was going to R&R the bearings, seals and replace the crush sleeve w/ a solid spacer, but I've decided to go a different route. The gear set has been pronounced "GO TO GO" by none other than the Chili_Man himself. I'll let it go for way cheap if intrested, PM me

P.S. I'm in Highlands Ranch.

Entire Thread
Subject	Posted By	Posted
pull n save diffs versus rebuilt	Anonymous	09/20/05 07:30 PM
Re: pull n save diffs versus rebuilt	Red_Chili	09/20/05 07:38 PM
Re: pull n save diffs versus rebuilt	Seldom_Seen	09/20/05 10:43 PM
Re: pull n save diffs versus rebuilt	Brian894X4	09/20/05 08:29 PM
Re: pull n save diffs versus rebuilt	Staceman	09/20/05 08:56 PM
Re: pull n save diffs versus rebuilt	Red_Chili	09/20/05 09:57 PM
Re: pull n save diffs versus rebuilt	Anonymous	09/20/05 11:28 PM
Re: pull n save diffs versus rebuilt	Kaptain	09/21/05 12:18 AM
Re: pull n save diffs versus rebuilt	Greg_Canada	09/21/05 12:57 AM
Re: pull n save diffs versus rebuilt	DRTDEVL	09/21/05 03:15 AM
Re: pull n save diffs versus rebuilt	Toybluggie	09/21/05 03:22 AM
Re: pull n save diffs versus rebuilt	kewlynx	09/21/05 04:00 AM
Re: pull n save diffs versus rebuilt	kyle-22r	09/21/05 04:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: