Hi all. I went a little to deep in water a couple of weeks ago, it was submerged to the door handles for about 5 seconds. It was fine for another hour then it just reved up and slowly stopped moving. I drained the tranny and found lots of water in it. I then took a line off the radiator and flushed it until the fluid was clean and clear, About 5 gallons. I refilled with dextron 3 and it was ok. Then I went for another ride and got wet same thing, except this time was just puddles. Drained flushed ETC... Tonight I rode and really didn't get wet at all and it is whirling and wont go , Drained fluid and it is clean and clear. I found the vent tube tonight and it comes out and runs fore ward to terminate somewhere that I cant feel too.
SO was my tranny ruined the first time I got water in it and now I am just wasting money flushing it? It is whining like a power steering pump out of fluid. May be going out when it heats up and the water crossings are coincidence.
How on earth does the pan come down to get to the filter? Looks like the fill tube is part of the pan??? Does that cross member come down?? Does it have a filter? Thanks for the help. Happy to see this board has grown since my absence!! Some pics of the other night: Ok it was a little longer than 5 seconds.


1989 Dodge Raider V-6, 33" Swampers.
Raider pics