She's going to be so pissed when she finds out.................... <img src="/forums/images/graemlins/smile.gif" alt="" /> J/K.

Its nothing to major but I think it turned out really well.
I used OME 912's in the rear, no spacers. And got about 2 1/2" . Then cranked the front up to about an inch lower then the rear, to give it alittle rake <img src="/forums/images/graemlins/smile.gif" alt="" />. And it rides so much better too!!!
The vx springs were SO MUCH easier to get in and out than a rodeo!!!!! It only took about 20min to lift the rear total! <img src="/forums/images/graemlins/smile.gif" alt="" />. I did a ball joint flip in the front, but also no spacer. Anyway here's some pics...


The first pic is before the lift... [Linked Image] [Linked Image] [Linked Image]
This is just after the rear springs were installed.

[Linked Image] [Linked Image] [Linked Image]

89 trooper, tera low t-case gears,5.38's, 3" indy4xsus lift3"body lift,safari snorkle,warn winch,custom bull bar,custom rock sliders,warn hubs,35x13.50r15,custom rear bumper trooper pics