94 Rodeo V6 - Heater Core Removal Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 94 Rodeo V6 - Heater Core Removal Question [Re: CIrrusnine] #648887 09/21/05 08:55 PM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

yes if it is anything like a 92 Pickup. you can unbolt the heater core box from the firewall and remove it. You might have to unbolt the condenser assembly and move it an inch to pull it out but the a/c lines run through a gasketed hole in the firewall so disconnecting the hoses should not be necessary.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
94 Rodeo V6 - Heater Core Removal Question	CIrrusnine	09/21/05 08:27 PM
Re: 94 Rodeo V6 - Heater Core Removal Question	CPOM	09/21/05 08:55 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.515s Queries: 16 (3.513s) Memory: 0.5946 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-06-06 20:36:52 UTC
Valid HTML 5 and Valid CSS