well I noticed that my rear driveshaft wasn't straight inline from the rear end to the tranny, so i started looking into it and found out that my trans/tcase had been pushed to the side. Apparently my front driveshaft isn't long enough and it compressed all the way and pushed the tranny over. Now my question is is the mount broken? As you can see in the pic below when i lifed up the tranny it just comes right up. If the mounts is broken which i think it is, do you have to replace the whole metal assembly that goes around the bottom and bolts the the side with the 2 14mm bolts? I assume yes. here the link so you can see what i've got

http://community.webshots.com/photo/124372714/457686150NpjofK

thanks
<img src="/forums/images/graemlins/cheers.gif" alt="" />
Eric