ADD axle shaft removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ADD axle shaft removal [Re: buckgrunter] #649141 09/22/05 10:14 PM

Joined: Feb 2004

Posts: 290

Duncannon, Pa

Kaptain

Mudrunner

There is a snap ring holding it in place. You need a slide hammer or a puller to get it out. It takes a good bit of force to get it to come out. I had good luck using a dent puller and a fabbed tool (same idea of a slide hammer), two slides and it popped out.

93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Entire Thread
Subject	Posted By	Posted
ADD axle shaft removal	buckgrunter	09/22/05 01:16 PM
Re: ADD axle shaft removal	Kaptain	09/22/05 10:14 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.396s Queries: 16 (3.394s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-05-28 10:32:28 UTC
Valid HTML 5 and Valid CSS