3.0 with oil in the intake

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 with oil in the intake [Re: ToyoLoyal] #649690 09/26/05 05:48 PM

Joined: Jun 2005

Posts: 1,038

Eastkabumfuck,OR, USA

Seattlegti Offline

Body Damage is Cool

There is a vent from the driver side valve cover to the intake tube. Probobly put too much oil in it an blew some into the intake. I disconnected mine when I put the K&N intake in, just put a small cone filter in the end of the valve cover breather.

Entire Thread
Subject	Posted By	Posted
3.0 with oil in the intake	ToyoLoyal	09/24/05 04:01 PM
Re: 3.0 with oil in the intake	Seattlegti	09/26/05 05:48 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 16 (3.500s) Memory: 0.5924 MB (Peak: 0.6254 MB) Data Comp: Off Server Time: 2026-06-11 16:35:16 UTC
Valid HTML 5 and Valid CSS