Fuel Pressure Gauge

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fuel Pressure Gauge [Re: Don_W] #650362 09/30/05 03:22 AM

Anonymous

Unregistered

To save some cash, you'll merely need to buy a 100psi guage and put 5/16" nipples on each side of it, about 6" each side of 5/16" neoprene fuel line and you're done. Use the clamps from the injector rail end to FPR (where you'll put this device) and exact fuel pressure will be displayed.

Entire Thread
Subject	Posted By	Posted
Fuel Pressure Gauge	Don_W	09/27/05 03:12 AM
Re: Fuel Pressure Gauge	Anonymous	09/30/05 03:22 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 16 (3.503s) Memory: 0.5920 MB (Peak: 0.6249 MB) Data Comp: Off Server Time: 2026-06-12 13:45:22 UTC
Valid HTML 5 and Valid CSS