Quick pinion preload question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Quick pinion preload question [Re: ZUK] #652276 10/04/05 12:35 AM

Joined: Jun 2000

Posts: 1,002

The OC

carter

Body Damage is Cool

So it is ok for it to take a lot more torque to begin rotating? It didn't feel like that when I disassembled it. I didn't take any torque readings on disassembly.

Mike Carter
85 & 86 4Runners

My Website

Entire Thread
Subject	Posted By	Posted
Quick pinion preload question	carter	10/03/05 04:46 PM
Re: Quick pinion preload question	ZUK	10/03/05 11:31 PM
Re: Quick pinion preload question	carter	10/04/05 12:35 AM
Re: Quick pinion preload question	ZUK	10/04/05 04:03 AM
Re: Quick pinion preload question	carter	10/04/05 10:16 AM
Re: Quick pinion preload question	carter	10/05/05 11:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.548s Queries: 16 (3.546s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-18 05:46:33 UTC
Valid HTML 5 and Valid CSS