What size air hose - 3/8 or 1/2 inch?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

What size air hose - 3/8 or 1/2 inch? #653897 10/06/05 07:13 PM

Joined: Mar 2004

Posts: 63

Texas, USA

MarkD

Getting the Wheeling Fever

I just recently acquired an air compressor and some various air tools and need to do some work on my '93 pickup soon. I want to replace that stupid plastic coil hose that came with the compressor. Question is...what diameter air hose should I get 3/8" or 1/2"? I am not planning on using anything stronger than a 1/2" impact wrench. Thanks.

'93 Pickup | 22R-E | 2WD| Yeah...it's my daily ride.

Entire Thread
Subject	Posted By	Posted
What size air hose - 3/8 or 1/2 inch?	MarkD	10/06/05 07:13 PM
Re: What size air hose - 3/8 or 1/2 inch?	4Crawler	10/06/05 07:21 PM
Re: What size air hose - 3/8 or 1/2 inch?	Greg_Canada	10/07/05 01:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.895s Queries: 15 (3.841s) Memory: 0.5963 MB (Peak: 0.6293 MB) Data Comp: Off Server Time: 2026-06-21 06:25:57 UTC
Valid HTML 5 and Valid CSS