What size air hose - 3/8 or 1/2 inch?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: What size air hose - 3/8 or 1/2 inch? [Re: MarkD] #653898 10/06/05 07:21 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

I use 1/4" for all my on-board air stuff as well as in my garage, 1/4" ID, 1/2" OD. That size hose is plenty big, flows about 35 CFM, and is small enough to route easily.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
What size air hose - 3/8 or 1/2 inch?	MarkD	10/06/05 07:13 PM
Re: What size air hose - 3/8 or 1/2 inch?	4Crawler	10/06/05 07:21 PM
Re: What size air hose - 3/8 or 1/2 inch?	Greg_Canada	10/07/05 01:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.485s Queries: 16 (3.483s) Memory: 0.5981 MB (Peak: 0.6311 MB) Data Comp: Off Server Time: 2026-06-21 08:01:30 UTC
Valid HTML 5 and Valid CSS