Antenna motor help

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Antenna motor help #654064 10/07/05 05:26 PM

Joined: Jan 2004

Posts: 98

Santa Cruz, CA

Hugh

Getting the Wheeling Fever

I've got a new antenna mast (94' 4runner), but the old plastic whip is broken off inside the motor.

How do I get to the motor to remove the plastic thing? Through the inside or through the wheel well?

Thanks, Hugh

94' 4Runner SR5 3.0L, 4X4, 5-speed, 200K

01' Sienna XLE, 105K, auto everything...

91' Ford F-250, 7.3 liter IDI diesel, 5-speed, 170K

Entire Thread
Subject	Posted By	Posted
Antenna motor help	Hugh	10/07/05 05:26 PM
Re: Antenna motor help	kewlynx	10/08/05 02:36 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.749s Queries: 15 (5.747s) Memory: 0.5926 MB (Peak: 0.6255 MB) Data Comp: Off Server Time: 2026-06-13 15:11:59 UTC
Valid HTML 5 and Valid CSS