That's great stuff!

Using this method, you can get the camber spot on, but if you leave .125" gap top or bottom you are looking at about .25 degrees error. The spec is .75 degree in or out so ypu can really nail it.

As for toe. I thought it was funny that the spec is 50 thou toed in within a window of .080. So basically, make the fronts square or error on the side of a little toe in. .050" on a wheeling 4x4 is ridiculously small as to be laughable.

Frank

1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos.
www.sdori.com