Lower Ball Joint Replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Lower Ball Joint Replacement [Re: WillV] #655227 10/11/05 11:47 PM

Joined: Jan 2003

Posts: 357

Mt. Crawford, VA

ckimbrough18 Offline

Mudrunner

From the looks of your write up, both the top and lower ball joint will have to come loose to be able to get it out. Will I need to disassemble the hubs for this? Your write up was really great, thanks. I just don't know how much of it I need to do, since I am not trying to get to my cv boots.
Thanks,
Charles

Trooper has been sold!

Entire Thread
Subject	Posted By	Posted
Lower Ball Joint Replacement	ckimbrough18	10/11/05 12:30 PM
Re: Lower Ball Joint Replacement	paulevans76	10/11/05 06:36 PM
Re: Lower Ball Joint Replacement	WillV	10/11/05 10:48 PM
Re: Lower Ball Joint Replacement	ckimbrough18	10/11/05 11:47 PM
Re: Lower Ball Joint Replacement	CPOM	10/12/05 05:48 PM
Re: Lower Ball Joint Replacement	ckimbrough18	10/12/05 07:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.364s Queries: 16 (3.361s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-05-25 15:08:05 UTC
Valid HTML 5 and Valid CSS