Lower Ball Joint Replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Lower Ball Joint Replacement [Re: ckimbrough18] #655228 10/12/05 05:48 PM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

you need to undo the clips to let your cv axles out of your hubs. Then you need to remove that castle nut on the ball joint. Then you need to beat the bag out of the BJ to get it out of the knuckle.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
Lower Ball Joint Replacement	ckimbrough18	10/11/05 12:30 PM
Re: Lower Ball Joint Replacement	paulevans76	10/11/05 06:36 PM
Re: Lower Ball Joint Replacement	WillV	10/11/05 10:48 PM
Re: Lower Ball Joint Replacement	ckimbrough18	10/11/05 11:47 PM
Re: Lower Ball Joint Replacement	CPOM	10/12/05 05:48 PM
Re: Lower Ball Joint Replacement	ckimbrough18	10/12/05 07:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.516s Queries: 16 (3.352s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-05-26 18:52:06 UTC
Valid HTML 5 and Valid CSS