So I finally get everything plumbed up and running, and I find out the thing has 2 chambers inside of it, separated by a steel divider. I had the air coming in one side, but it was not coming out the other.

Do you think it would be alright if I got a big long drill bit and drilled a hole through the center of the divider? I can easily do it with a long drill bit. I'll clean all the shavings out of the tank before I use it.

Or...do I run a short hose from the front half to the back half? It has tons of threaded holes in it, and I beleive I have the connectors to rig it up.

Oh and the compressor has been working OK for me. Havent really used it for a lot of stuff, but have taken off a few wheels, caliper mounting bolts, and blew off the mower before puting it back in the garage. Definetly doesnt put out the full 5cfm as it advertises, but for $100 it works out great. I'm going to do a CV joint install next weekend and I'll need to impact off the 32mm axle nut, so we'll see how it does on that task.