Yesterday I changed both front and back brake pads, shoes, drums and rotors. I had trouble pushing back the passenger front caliper because I did not have the right clamp in my garage so I took it off. Once I got every on, I tried to bleed the brakes but I don't seem to get a good high pedal and the brake light is on. My fluid level is good and there seems to be an excellent stream of fluid with no air out of the bleeders. The brakes seem to work well as I took it for a drive but the pedal seems low and the brake light isn't going out. Any Ideas?

ttreat
95 T-100 SR5 4x4
Pretty much stock, except for the goofy oil pressure gauge the previous owner installed.