On the V6, changing the water pump, if that is what the problem is, is not a big deal.

Basically you need to get the fan shroud out of the way, you may need to remove the power steering pump, depending on the number of angles that you elbows can achieve and the same for the A/C compressor.

Once you can get to it, unbolt the water pump. Clean the gasket surface, and reinstall the new pump.

There is a weep hole, but you may need a double jointed eyeball to see it.

Last edited by Jim_Paget; 10/21/05 01:45 AM.
Jim Paget
88 YJ with a few changes

www.rrr4x4.com