remanufactured ax15

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: remanufactured ax15 [Re: tomriddle] #659439 10/25/05 03:43 AM

Anonymous

Unregistered

Since you spent the money to get the new tranny and clutch, the time to get the old stuff out, go the extra step and remove the flywheel and get it resurfaced. Once it is out knocking the old pilot out with a punch is a piece of cake. Just put the new one in AFTER resurfacing.

Entire Thread
Subject	Posted By	Posted
remanufactured ax15	tomriddle	10/24/05 09:59 PM
Re: remanufactured ax15	BigJim	10/24/05 10:18 PM
Re: remanufactured ax15	tomriddle	10/25/05 02:00 AM
Re: remanufactured ax15	BigJim	10/25/05 02:31 AM
Re: remanufactured ax15	Anonymous	10/25/05 03:43 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.517s Queries: 16 (3.515s) Memory: 0.5963 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-04 11:06:01 UTC
Valid HTML 5 and Valid CSS