3rd member question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3rd member question [Re: Stinson] #659627 10/25/05 03:58 AM

Anonymous

Unregistered

Correct but the shaft ends may be different as you said. Willl work with cross drilled flanges, as long as you put it in the rear as stated. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
3rd member question	Stinson	10/25/05 03:49 AM
Re: 3rd member question	4Crawler	10/25/05 03:57 AM
Re: 3rd member question	Anonymous	10/25/05 03:58 AM
Re: 3rd member question	Stinson	10/25/05 04:07 AM
Re: 3rd member question	4Crawler	10/25/05 04:13 AM
Re: 3rd member question	Stinson	10/25/05 04:16 AM
Re: 3rd member question	Anonymous	10/25/05 04:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 16 (3.498s) Memory: 0.6026 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-08 02:30:12 UTC
Valid HTML 5 and Valid CSS