3rd member question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3rd member question #659628 10/25/05 04:07 AM

Joined: Sep 2003

Posts: 39

Stinson

Getting the Wheeling Fever

Thanks guys one more question, if I were to cross drill/ redrill the flange how do I make sure the the flage is centered/holes drilled in the right spot? Just want to make sure I dont have a vibration problem.

Entire Thread
Subject	Posted By	Posted
3rd member question	Stinson	10/25/05 03:49 AM
Re: 3rd member question	4Crawler	10/25/05 03:57 AM
Re: 3rd member question	Anonymous	10/25/05 03:58 AM
Re: 3rd member question	Stinson	10/25/05 04:07 AM
Re: 3rd member question	4Crawler	10/25/05 04:13 AM
Re: 3rd member question	Stinson	10/25/05 04:16 AM
Re: 3rd member question	Anonymous	10/25/05 04:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.560s Queries: 15 (3.558s) Memory: 0.6046 MB (Peak: 0.6376 MB) Data Comp: Off Server Time: 2026-06-14 16:33:35 UTC
Valid HTML 5 and Valid CSS