Fan blade assembly...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Fan blade assembly... #660888 10/29/05 06:32 PM

Joined: Jan 2005

Posts: 46

Southern CA

maniac28

Getting the Wheeling Fever

My fan clutch is shot, so I have a replacement from pep boys (65 bucks... who knows how long it will last, but I'm not shelling out 180 for the OE). I was looking at my fan... it has decent cracks in between the blades. I suppose it's been this way since I got the truck. So the question is do I buy the 82 dollar dealer part, or stick with my old fan? I am guessing this part is dealer only...

Ian S.
Temecula, CA
1989 Montero LWB V6 LSD, BFG AT's, Daily Driver

Entire Thread
Subject	Posted By	Posted
Fan blade assembly...	maniac28	10/29/05 06:32 PM
Re: Fan blade assembly...	DougH	10/29/05 07:16 PM
Re: Fan blade assembly...	BobShaw	10/31/05 04:41 PM
Re: Fan blade assembly...	Anonymous	11/04/05 06:02 AM
Re: Fan blade assembly...	BobShaw	11/04/05 05:06 PM
Re: Fan blade assembly...	grass13	11/06/05 11:50 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 15 (3.500s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-25 15:06:48 UTC
Valid HTML 5 and Valid CSS