27.6k might be mis-leading if the pot was still in the circuit. Might have to isolate one lead such that the rest of the circuit doesn't influence the ohm reading.
First, I would run a test....note the rpm reading with the 27.6k value....then double it to 55k or maybe go half to 14k and see how that influences the rpm readings. Then take it from there. <img src="/forums/images/graemlins/kewl.gif" alt="" />

ps---my 92 shortbed 22RE and 5 speed has the electronic pich-up vs the cable. So I don't know what's going on there.

[color:"blue"]www.gearinstalls.com[/color]


01 Taco xtracab V6 auto TRD white
mostly stock
88 Runner/V6/auto/31"/5.29gear