tip for pulling pilot bearing

Print Thread

Rate Thread

Re: tip for pulling pilot bearing #663455 11/06/05 04:31 PM

Anonymous

Unregistered

the way i did it one time was found a bolt close to the same size and then used masking tape to cover the threads and make a good tight fit. then wacked the snot out of it.
<img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
tip for pulling pilot bearing	tomriddle	11/05/05 08:22 PM
Re: tip for pulling pilot bearing	BigJim	11/05/05 08:39 PM
Re: tip for pulling pilot bearing	Anonymous	11/05/05 09:38 PM
Re: tip for pulling pilot bearing	kc77cj7	11/06/05 01:16 AM
Re: tip for pulling pilot bearing	tomriddle	11/06/05 04:26 AM
Re: tip for pulling pilot bearing	Anonymous	11/06/05 11:33 AM
Re: tip for pulling pilot bearing	superdawg	11/06/05 01:51 PM
Re: tip for pulling pilot bearing	Anonymous	11/06/05 04:31 PM
Re: tip for pulling pilot bearing	BigJim	11/06/05 07:03 PM
Re: tip for pulling pilot bearing	TX4wl	11/06/05 07:26 PM
Re: tip for pulling pilot bearing	tomriddle	11/06/05 08:54 PM
Re: tip for pulling pilot bearing	Anonymous	11/07/05 10:00 PM
Re: tip for pulling pilot bearing	RSimister	11/09/05 05:57 PM
Re: tip for pulling pilot bearing	BigJim	11/10/05 01:26 AM
Re: tip for pulling pilot bearing	atavuss	11/06/05 02:31 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social: