Quote
My Sr that I just bought has fogs that don't work. I am interesting to hear what you do to solve the problem.

Doug; That would depend on how they were wired. I would first apply power and ground to the bulbs to see if they are working. Now at this point i would turn on the headlamps(low beam) and activate the fog lamp switch. DO we have power and ground to the lamps? I have seen some setups that use a relay to supply ground to an already powered up fog lamp. So be aware that this can go either way. Typically the fog lamps should not operate with the headlamps on high beam.
Good luck
Conner


Over the hill but still climbing.
88 Montero 2.6L auto, manual hubs, cooling fan conversion gps,recurved distributor,LSD Diff.