|
|
|
|
Re: rear end squat
[Re: 87Montero]
#664831
11/10/05 02:27 PM
|
Joined: Jan 2001
Posts: 3,876
Roll Me Over
|
Just remember it does it in low clearance areas. So dont smash your roof into anything when first putting it into gear. Such as this pic shows. This is after I lifted the raider some. As long as I did not stop in the door it fit but if I took it in and of gear while in the door it would bump. The Raider has been lifted more since then and no longer fits in the garage. <img src="/forums/images/graemlins/frown.gif" alt="" /> ![[Linked Image]](http://pics.montypics.com/tag/2004-05-06/1083868185_dscf0028.jpg)
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.553s Queries: 16 (3.551s) Memory: 0.6175 MB (Peak: 0.6505 MB) Data Comp: Off Server Time: 2026-06-23 09:55:00 UTCValid HTML 5 and Valid CSS