3.0 inline 6 from a Supra...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 inline 6 from a Supra... [Re: CJM] #665207 11/11/05 05:45 AM

Anonymous

Unregistered

since you are doing one, how much modification do you have to do? does the bell housing mount directly up? does the starter work? radiator? exhaust, all that stuff?? If it does with little mods I am definately gonna do one!

Entire Thread
Subject	Posted By	Posted
3.0 inline 6 from a Supra...	Anonymous	11/11/05 03:38 AM
Re: 3.0 inline 6 from a Supra...	Dingman	11/11/05 03:51 AM
Re: 3.0 inline 6 from a Supra...	CJM	11/11/05 04:14 AM
Re: 3.0 inline 6 from a Supra...	Anonymous	11/11/05 05:45 AM
Re: 3.0 inline 6 from a Supra...	kewlynx	11/11/05 05:57 AM
Re: 3.0 inline 6 from a Supra...	Adam F	11/11/05 06:52 AM
Re: 3.0 inline 6 from a Supra...	CJM	11/11/05 05:08 PM
Re: 3.0 inline 6 from a Supra...	Supra 4x4	11/12/05 05:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.605s Queries: 16 (3.603s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-02 11:55:43 UTC
Valid HTML 5 and Valid CSS