yay! I got it out <img src="/forums/images/graemlins/smile.gif" alt="" />

I tried jack, torch and sawzall - none were working at all. So i got smart:

I put breaker bar on bolt, and turned the control arm until I saw the bushing skip around the bolt. i was then able to punch it out about an inch, until the threads got hung up on bushing again.

I then used sawzall to cut the head/oval thingy off the bolt, and was then able to punch it out the oppostie direction.


Thanks for the help guys!

-Scerb

http://www.scerbfab.com/carb_faq.html