7.5 gear set-up problem...Got Shims?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 7.5 gear set-up problem...Got Shims? [Re: Ganoid] #666412 11/16/05 01:17 AM

Joined: Nov 2003

Posts: 116

Kingston, WA

TOY4ICK

Wheeler

I managed to scrounge up some Dana 44 shims and they fit perfectly. Now, I need to press off a bearing (Timken brand) and slide in a few shims. Thanks for the help, this should work great! Work is slow tomorrow so I might even have time to finish it off.

'86 4Runner SR5 - 22R-EB with V-6 Throttlebody, 2" 4Crawler B.L., Ball Joint Spacers, Rock SliderZ, TJ Coils, 5.29's, Rear Locker, 33" Duratracs

Entire Thread
Subject	Posted By	Posted
7.5 gear set-up problem...Got Shims?	TOY4ICK	11/14/05 07:36 PM
Re: 7.5 gear set-up problem...Got Shims?	ZUK	11/15/05 04:43 AM
Re: 7.5 gear set-up problem...Got Shims?	ZUK	11/15/05 05:02 AM
Re: 7.5 gear set-up problem...Got Shims?	Ganoid	11/15/05 01:08 PM
Re: 7.5 gear set-up problem...Got Shims?	TOY4ICK	11/16/05 01:17 AM
Re: 7.5 gear set-up problem...Got Shims?	Red_Chili	11/16/05 04:23 PM
Re: 7.5 gear set-up problem...Got Shims?	TOY4ICK	11/18/05 08:37 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.434s Queries: 16 (3.431s) Memory: 0.6059 MB (Peak: 0.6388 MB) Data Comp: Off Server Time: 2026-06-04 09:24:39 UTC
Valid HTML 5 and Valid CSS