Snap-on tool, YA9730 needed for timing belt replacement.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Snap-on tool, YA9730 needed for timing belt replacement. [Re: yorkt] #667101 11/17/05 02:40 AM

Joined: Dec 2002

Posts: 924

Eureka, CA

Kookadala

Rock Warrior

On other vehicles, I use a socket wrench with a cheater bar to back the pulley off and remove the belt.

96 T100 4x4 - 35's, 4" SL, 2" BL, 4.88s, ARBs, custom bumper & E9000 winch, etc.
99 F-350 4x4 superduty supercab turbodiesel longbed

Entire Thread
Subject	Posted By	Posted
Snap-on tool, YA9730 needed for timing belt replacement.	yorkt	11/16/05 10:22 PM
Re: Snap-on tool, YA9730 needed for timing belt replacement.	adam	11/16/05 10:40 PM
Re: Snap-on tool, YA9730 needed for timing belt replacement.	Kookadala	11/17/05 02:40 AM
Re: Snap-on tool, YA9730 needed for timing belt replacement.	95T100	11/17/05 03:23 AM
Re: Snap-on tool, YA9730 needed for timing belt replacement.	yorkt	11/17/05 10:16 PM
Re: Snap-on tool, YA9730 needed for timing belt replacement.	95T100	11/17/05 10:21 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.239s Queries: 16 (4.237s) Memory: 0.6015 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-12 10:58:32 UTC
Valid HTML 5 and Valid CSS