1st gen <=> 2nd gen Trooper rear axle compatibility?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

1st gen <=> 2nd gen Trooper rear axle compatibility? #667206 11/17/05 03:08 AM

Joined: Feb 2004

Posts: 278

Portland, OR

RubyTrooper Offline

Mudrunner

Hey Everybody,

My question, are the 1st gen and 2nd gen Trooper rear axles compatible? (Besides the suspension configuration) Are the third members interchangeable? Also, can a half shaft from a 2nd gen Trooper replace a half shaft of a 1st gen? TIA <img src="/forums/images/graemlins/cheers.gif" alt="" />

Jim

Isuzu Trooper, '91, 2.8L, 3" PA BL, coil sprung SAS, OX locker front, Detroit back, 5.38 gears...

Ruby's got a theme song!!! Sing-a-long

Entire Thread
Subject	Posted By	Posted
1st gen <=> 2nd gen Trooper rear axle compatibility?	RubyTrooper	11/17/05 03:08 AM
Re: 1st gen <=> 2nd gen Trooper rear axle compatibility?	onebadtrooper	11/17/05 03:36 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.004s Queries: 15 (4.001s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-04 22:30:02 UTC
Valid HTML 5 and Valid CSS