OK...PM me with your email if you would like the drawing for the spacers. I'll send a PDF file.

Ray,
The coil spring force keeps the spacers in place. Even at full articulation, the spring is still in compression; if not, the spring would fall out of the upper spring cup in the stock set up (no spacers).

Mike

1992 montero, cranked t-bars, OME springs, 1-1/2" spring spacers, Homemade rear bumper and roof rack, 33" BFG AT, 1" body lift, Superwinch hubs, '95 SR locking rear axle, was AT - now V5MT1-3 5spd.