|
|
|
|
no start up when cold
#668293
11/19/05 09:48 PM
|
Joined: Feb 2004
Posts: 81
OP
Getting the Wheeling Fever
|
my 91 4.0L yj won't start when its cold. when it's warmed up it starts fine, it cranks but i have no fuel or spark untill i keep on cranking then it will start after a half hour. my relays are fine my grounds to my ecm are fine i have no water in anything. i was thinking it was my crank pos. sensor but why would it be affected in the cold? Why does the cold effect it this way? Any sugestions?
91 yj renegade with 4.5" lift 33x10.5s wanting to be a rock eatin machine
|
|
Re: no start up when cold
[Re: rebelboydylan]
#668294
11/19/05 11:27 PM
|
|
Anonymous
Unregistered
|
If you arenÆt getting any spark cold, it is either the Crank or Cam position sensor (or computer, but that is highly unlikely). First off just disconnect the cam and crank sensors and clean out the connector. If those are dirty you might have solved the problem. If it still won't start get you there with a hair dryer and heat up the crank position sensor then distributor. If it starts after some heating of the sensor, replace it.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.008s) Memory: 0.5842 MB (Peak: 0.6333 MB) Data Comp: Off Server Time: 2026-11-18 12:03:55 UTCValid HTML 5 and Valid CSS