Solid Axle Knuckle Service

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Solid Axle Knuckle Service [Re: mnwolftrack] #668804 11/21/05 07:44 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

One option would be to pull the steering arms off and clean/inspect the knuckle bearings. If they are not pitted or damaged, put them back in with some new grease and call it good. If one or two is bad, you can get the parts from Toyota along with the seals.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Solid Axle Knuckle Service	mnwolftrack	11/21/05 07:35 PM
Re: Solid Axle Knuckle Service	4Crawler	11/21/05 07:44 PM
Re: Solid Axle Knuckle Service	mnwolftrack	11/21/05 07:49 PM
Re: Solid Axle Knuckle Service	kyle-22r	11/22/05 04:58 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.152s Queries: 16 (3.472s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-07 05:04:47 UTC
Valid HTML 5 and Valid CSS