But of course! First I'll try some TJ coils to boost my sagging rear a bit (to match the new 1"+ Alcan leaf springs I already have for the front). Later I'd like to try to fabricate an all coil rear like the one in the picture I posted a few messages earlier in this thread. I'm thinking about a three link system with panhard bar (track bar). A control arm from each of the front rear spring mounting points, another from the "horse collar" crossmember (or somewhere there abouts, getting the geometry right being a key factor) to some bracketry on the top of the differential all made up out of 2-1/2" DOM tubing with Currie Johnnie Joints at the attachment points. If the rear goes well it will give me confidence to attack the front. -- Matt