OK so here's the pics I promised. Lift is good, it matches my SAS with marlin springs, nice and level. I did take the next-to-shortest leaf out of the front springs. Anyhow, you can see how far it pushes the chevies down...

[Linked Image]

But as I said before, I am not sure about the flex aspect. Maybe I'll get a chance to try it out tomorrow..

[Linked Image]

And just for grins, here's one of my groovy new triple-drilled output flange from Marlin...the cause of the " actual complaint about Marlin" thread on the OT forum. Attached to it is my groovy new CV driveshaft...

[Linked Image]

...that needs shims for correction of angle at the axle...

[Linked Image]

If Mad Max had a 4runner...