you might want to think about Balljoint spacers before you rake the torsion Bars.
Karl, do you have the ball joint spacers installed? I have some problems with the front of the frame where ZUK helped me out with a little mig welding on a crack, where it was crunched by the PO. So my driver side cams are adjusted ALL the way out, where did you have to adjust yours, if ya got 'em that is. <img src="/forums/images/graemlins/smile.gif" alt="" /> Anyone else feel free to chime in <img src="/forums/images/graemlins/cheers.gif" alt="" />
were you really sagging in the rear w/ your pickup? mine sits a little higher in the back and its stock.
Yeah, me and ZUK tried to figure it out but to no avail, I was ~1.5 inches or something off on the driver side <img src="/forums/images/graemlins/scared.gif" alt="" /> but thats all fixed now!
The key here is to get the lowest overload leaf off the rest of the spring pack. If your leaves are off the lowest one, you are probably OK. My 4Runner feels more like a caddy after this little inexpensive "mod". Your truck will have a "sprinboard" affect when resting on the overload. You may not even know it because it takes so long for the springs to act up like this. Not an overnite difference with the ride for sure, until the mod is complete at least. The difference is night and day! <img src="/forums/images/graemlins/kewl.gif" alt="" />
Couldn't have said it better myself Stace!
Kyle, if you get a chance, get a couple pics of your dad's Chevy packs....especially the area where the dual coils would go.....and the inches from center of pack to underside of frame. thanks ZUK
Def will ZUK, not sure if he'd want to anytime soon, but I'll take lots of pics so you can see how "the general" likes to build their trucks....hopefully it's not spring under, that could make it interesting <img src="/forums/images/graemlins/smile.gif" alt="" /> he wouldn't want any sort of lift, just something to help the truck sit level with that popup trailer on <img src="/forums/images/graemlins/lol.gif" alt="" /> Thanks again ZUK! my next problem is what to do about that front end..... <img src="/forums/images/graemlins/confused.gif" alt="" />
I'm all out of red coils now <img src="/forums/images/graemlins/frown.gif" alt="" />
hehee!! I got the last of the bling bling red coils!!!
