|
|
 Re: I need these springs!!!
[Re: Adam F]
#669270
04/07/06 01:59 AM
|
Joined: Oct 2002
Posts: 1,305
OP
Body Damage is Cool
|
Good pic Adam. I can see that it will work very nicely for you. You won't be saving any money by just getting the 4 brackets by themselves but they are 75 plus shipping if you really want to do that....but the coils will end up costing you almost 150 by the time they get delivered to you so it's a wash-out. The bottom mount can weld or bolt onto the plate. The top mount will have to be MIG welded to the BOTTOM of the existing "stopper".....this will give you 3" of lift using the 14" 150 pound/inch rated coils. I will post 2 pics to show what I mean shortly <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: I need these springs!!!
[Re: ZUK]
#669271
04/07/06 06:19 AM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
What coils are these from? Stockers? Lift springs? I'll have to try and talk the wife out of $220. <img src="/forums/images/graemlins/lol.gif" alt="" />
|
|
|
Re: I need these springs!!!
[Re: Adam F]
#669272
04/07/06 07:08 AM
|
Joined: Oct 2005
Posts: 1,287
Body Damage is Cool
|
IIRC ZUK told me that they were made my sway-a-way....what pics are ya lookin for Adam? I've got some of my rigs coil setup on my computer that I could post.
-1986 TOYOTA
22R
ZUK coil rear
Torqued T-Bars
Marlin HD clutch
Newly rebuilt!! Runnin' like a champ!
AZTTORA #492
TLCA member
"I hear there's rumors on the Internets that we're going to have a draft."
--George W. Bush
|
|
|
Re: I need these springs!!!
[Re: 4WD22R]
#669273
04/07/06 03:13 PM
|
Joined: Oct 2002
Posts: 1,305
OP
Body Damage is Cool
|
IIRC ZUK told me that they were made my sway-a-way....what pics are ya lookin for Adam? I've got some of my rigs coil setup on my computer that I could post. I guess Sway-A-Way is just a distributor....they are actually made by Eibach.... read the description in this link (they are pro qual...made for race teams) http://www.offroadwarehouse.com/Store_ViewProdDetail.asp!ProdID!13986!Cat!1333
|
|
 TJ Springs rub stock wheels w/ 235's
[Re: 86Original]
#669274
04/07/06 04:45 PM
|
Joined: Feb 2006
Posts: 32
Getting the Wheeling Fever
|
Yesterday I took off my 32x11.50x15s and put back on my stock wheels & 235x75x15s. When I turn tightly, the tires rub on the TJ coils. I guess my bigger wheels have less backspace than the factory wheels <img src="/forums/images/graemlins/lol.gif" alt="" />
[color:"royalblue"]Original Owner: 86 4Runner, Marlin 4.7:1 t/c, Aussie f/r, BJ Spacers, 4Crawler Sliderz, BudBuilt skid-x-belly, Warn M8,TJM T17, Alcan leaves, OME N94 & N98, MC rear bumper[/color]
|
|
|
Re: TJ Springs rub stock wheels w/ 235's
[Re: 86Original]
#669275
04/07/06 05:36 PM
|
Joined: Dec 2002
Posts: 262
Mudrunner
|
Get the TJ front coils, smaller in diameter but longer. Cut them to the same height as the rear coil and your all set. I had to trim ¢ coil off mine because of shackle angle and have no rubbing problems. <img src="/forums/images/graemlins/smile.gif" alt="" /> IÆm getting ready to install another set for my co-workers 4Runner. Went to the local 4 Wheel Parts store and got the springs for free as they had a stack sitting in the corner from lifting so many heeps. <img src="/forums/images/graemlins/kewl.gif" alt="" />
Adam W.
87 4Runner SR5 - 22RE w RV head & TRD Cam, LCE header, W56B-HD, 4" Stage II, 1.5" BJS, Rancho T-bars, F 5.29, R 5.29 ARB V6 FF w LC disks, 35" MT/R's
85 4Runner frame, 5" Marlin springs, 5:29 ARB HP front. Work in progress - Always!
|
|
|
Re: TJ Springs rub stock wheels w/ 235's
[Re: D-runner]
#669276
04/08/06 04:23 AM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
Yea thats what I'm talking about. Free! lol
So these are Jeep TJ front coil springs?
Zuk...will your captured mounts accept the Jeep TJ front springs?
|
|
|
Re: TJ Springs rub stock wheels w/ 235's
[Re: Adam F]
#669277
04/08/06 05:39 AM
|
Joined: Oct 2005
Posts: 392
Mudrunner
|
what year front jeep springs would work?
|
|
|
Re: TJ Springs rub stock wheels w/ 235's
[Re: 1986xtracab]
#669278
04/08/06 06:40 AM
|
Joined: Dec 2002
Posts: 262
Mudrunner
|
Any year Jeep TJ front springs 97-05 will work. Check out my install in this thread for how I did mine.
Adam W.
87 4Runner SR5 - 22RE w RV head & TRD Cam, LCE header, W56B-HD, 4" Stage II, 1.5" BJS, Rancho T-bars, F 5.29, R 5.29 ARB V6 FF w LC disks, 35" MT/R's
85 4Runner frame, 5" Marlin springs, 5:29 ARB HP front. Work in progress - Always!
|
|
|
Re: TJ Springs rub stock wheels w/ 235's
[Re: Adam F]
#669279
04/08/06 01:31 PM
|
Joined: Oct 2002
Posts: 1,305
OP
Body Damage is Cool
|
Yea thats what I'm talking about. Free! lol
So these are Jeep TJ front coil springs?
Zuk...will your captured mounts accept the Jeep TJ front springs? nope...you'll have to be your own fabber for those.
|
|
|
|
