|
|
|
|
 Distributor options
#671139
11/28/05 03:15 AM
|
Joined: Mar 2005
Posts: 381
OP
Mudrunner
|
Does anyone know of an aftermarket performance distributor for the 2.6?
02 Ford F-250 4X4 PSD...zero body damage
67 Weimann 18' Jet boat...zero body damage except for the trailer drags on the ground from time to time
|
|
 Re: Distributor options
[Re: Roll_me_over]
#671140
11/28/05 04:39 PM
|
Joined: Apr 2004
Posts: 1,494
Body Damage is Cool
|
You could probably get a cap and rotor with copper contacts and a more powerfull coil and plug wires from Summit.
87 Raizer, 4.3V6, Mod TH700R4,231CHD, detroit rear and LSD front, bouncy seats, 2" lift and 32x15 BFG MT tires.
|
|
|
Re: Distributor options
[Re: BobShaw]
#671141
11/28/05 10:57 PM
|
Joined: Mar 2005
Posts: 381
OP
Mudrunner
|
Well, my dizzy went bad on the trail and I need to replace it. I have a performance engine, aftermarket coil, wires, cap and rotor but was wondering if there was an aftermarket dizzy for the 2.6. Looks like I'll just be replacing it with an OE...
02 Ford F-250 4X4 PSD...zero body damage
67 Weimann 18' Jet boat...zero body damage except for the trailer drags on the ground from time to time
|
|
|
Re: Distributor options
[Re: Roll_me_over]
#671143
11/29/05 09:51 PM
|
Joined: Dec 2004
Posts: 949
Rock Warrior
|
just use a stock distributor with an MSD box. I believe there a few rebuilt distributors on eBay that last time I looked
|
|
|
Re: Distributor options
[Re: Monty]
#671144
11/29/05 11:18 PM
|
Joined: Mar 2005
Posts: 381
OP
Mudrunner
|
yeah, I was thinking that. <img src="/forums/images/graemlins/kewl.gif" alt="" />
Does the MSD box control the motor or just ignition?
02 Ford F-250 4X4 PSD...zero body damage
67 Weimann 18' Jet boat...zero body damage except for the trailer drags on the ground from time to time
|
|
|
|
|
|
