|
|
|
|
Re: Replace an AMC 304 with a 360
[Re: get2now]
#671259
02/27/07 02:18 AM
|
Joined: Nov 2004
Posts: 28
OP
Getting the Wheeling Fever
|
Just thought I'd give y'all an update. Man, does time fly? Here it is over a year later and the Jeep's already been sitting for about four months. It's running pretty well and even passed the smog test. I did have to use the 360's exhaust manifolds but they bolted right up to the exhaust pipes. Needed to take out a lot of the vacuum hoses too. Also ended up swapping the 360's oil gauge sending unit for the 304's. The flex plates were different too. Amazingly it ended up going together pretty well. Now if I don't sell it first, I might take it out on the trail in a couple months. Right now it's time for snow skiing though. Thanks for all the help. Gary
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.769s Queries: 16 (3.767s) Memory: 0.6080 MB (Peak: 0.6410 MB) Data Comp: Off Server Time: 2026-06-03 07:36:31 UTCValid HTML 5 and Valid CSS