1991 VS 1996 2.6ltr

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1991 VS 1996 2.6ltr [Re: hellbound] #671628 11/29/05 03:34 PM

Joined: Nov 2005

Posts: 17

hellbound

Need a Spot

thanks mate!

Ahh i see, my dilemma is that im not sure if the wiring loom and ECU thats in there already will work with an engine of a later model, i.e. 1991 loom with a 1996 motor?

Entire Thread
Subject	Posted By	Posted
1991 VS 1996 2.6ltr	hellbound	11/29/05 10:15 AM
Re: 1991 VS 1996 2.6ltr	hellbound	11/29/05 02:52 PM
Re: 1991 VS 1996 2.6ltr	Madcat	11/29/05 03:28 PM
Re: 1991 VS 1996 2.6ltr	hellbound	11/29/05 03:34 PM
Re: 1991 VS 1996 2.6ltr	Jim_Paget	11/29/05 04:25 PM
Re: 1991 VS 1996 2.6ltr	JLEMOND	11/29/05 11:06 PM
Re: 1991 VS 1996 2.6ltr	hellbound	11/30/05 02:06 AM
Re: 1991 VS 1996 2.6ltr	Anonymous	12/03/05 04:10 PM
Re: 1991 VS 1996 2.6ltr	mlclark	12/03/05 05:45 PM
Re: 1991 VS 1996 2.6ltr	JLEMOND	12/03/05 07:00 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.497s Queries: 16 (3.497s) Memory: 0.6116 MB (Peak: 0.6446 MB) Data Comp: Off Server Time: 2026-06-20 13:29:45 UTC
Valid HTML 5 and Valid CSS