1991 VS 1996 2.6ltr

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1991 VS 1996 2.6ltr [Re: hellbound] #671632 12/03/05 04:10 PM

Anonymous

Unregistered

I don't intend to threadjack here, but...

What are the differences in the cylinder heads? I have been told that there is a combustion chamber difference, but so far nobody seems to know what problems will be created if a 96 2.6 head is put on the earlier 2.6 block??

My truck is a 93 and the parts ewngine is from a 96 rodeo.

Last edited by FrankB; 12/03/05 04:18 PM.

Entire Thread
Subject	Posted By	Posted
1991 VS 1996 2.6ltr	hellbound	11/29/05 10:15 AM
Re: 1991 VS 1996 2.6ltr	hellbound	11/29/05 02:52 PM
Re: 1991 VS 1996 2.6ltr	Madcat	11/29/05 03:28 PM
Re: 1991 VS 1996 2.6ltr	hellbound	11/29/05 03:34 PM
Re: 1991 VS 1996 2.6ltr	Jim_Paget	11/29/05 04:25 PM
Re: 1991 VS 1996 2.6ltr	JLEMOND	11/29/05 11:06 PM
Re: 1991 VS 1996 2.6ltr	hellbound	11/30/05 02:06 AM
Re: 1991 VS 1996 2.6ltr	Anonymous	12/03/05 04:10 PM
Re: 1991 VS 1996 2.6ltr	mlclark	12/03/05 05:45 PM
Re: 1991 VS 1996 2.6ltr	JLEMOND	12/03/05 07:00 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.782s Queries: 16 (3.779s) Memory: 0.6098 MB (Peak: 0.6428 MB) Data Comp: Off Server Time: 2026-06-13 16:10:21 UTC
Valid HTML 5 and Valid CSS