rear disc conversion

Print Thread

Rate Thread

Re: rear disc conversion [Re: Red_Chili] #671806 12/03/05 04:21 PM

Joined: Oct 2005

Posts: 72

Connecticut

hdrisc

Getting the Wheeling Fever

I have located all the parts for the conversion, execpt the brackets. I will check runout, but I don't think there will be a problem. I'm using a MC from a 1990 4Runner (1" bore).

Isn't it the little things that make any type of conversion fun/interesting to do? If you could just buy something and have it work/fit the first time you bolt it on your truck, that would be kinda boring. Just my opinion.

Entire Thread
Subject	Posted By	Posted
rear disc conversion	hdrisc	11/30/05 04:13 AM
Re: rear disc conversion	CraShYota	11/30/05 04:35 AM
Re: rear disc conversion	OOP'S	11/30/05 06:05 AM
Re: rear disc conversion	hdrisc	11/30/05 01:17 PM
Re: rear disc conversion	Greg_Canada	11/30/05 05:13 AM
Re: rear disc conversion	DirtyHarry	12/01/05 03:56 AM
Re: rear disc conversion	willzrunna96	12/01/05 05:52 AM
Re: rear disc conversion	87Toy4x4	12/01/05 05:55 AM
Re: rear disc conversion	Red_Chili	12/01/05 04:13 PM
Re: rear disc conversion	DirtyHarry	12/01/05 06:30 PM
Re: rear disc conversion	OOP'S	12/02/05 02:31 AM
Re: rear disc conversion	hdrisc	12/02/05 02:56 AM
Re: rear disc conversion	Greg_Canada	12/02/05 01:28 AM
Re: rear disc conversion	matts	12/02/05 06:43 AM
Re: rear disc conversion	OOP'S	12/02/05 07:27 AM
Re: rear disc conversion	Red_Chili	12/02/05 03:59 PM
Re: rear disc conversion	hdrisc	12/03/05 04:21 PM
Re: rear disc conversion	matts	12/04/05 07:31 AM
Re: rear disc conversion	Red_Chili	12/05/05 07:57 PM
Re: rear disc conversion	TheFabricator	12/04/05 01:46 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: