Power brake vacuum hose

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Power brake vacuum hose [Re: Don_W] #673757 12/07/05 03:29 AM

Anonymous

Unregistered

This should be a 1/2 inch neoprene vac hose, and the booster check valve is standard Chevy (or GM) and rarely fails. Lots O' GM influance on those great old Zus.
Rare for that hose to fail (but possible), check for tight valve adjustment.

Entire Thread
Subject	Posted By	Posted
Power brake vacuum hose	Don_W	12/05/05 03:08 AM
Re: Power brake vacuum hose	randii	12/05/05 03:43 AM
Re: Power brake vacuum hose	Don_W	12/05/05 10:21 AM
Re: Power brake vacuum hose	mlclark	12/05/05 04:59 PM
Re: Power brake vacuum hose	litnin	12/06/05 01:53 AM
Re: Power brake vacuum hose	Anonymous	12/07/05 03:29 AM
Re: Power brake vacuum hose	Don_W	12/08/05 01:46 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.465s Queries: 16 (3.463s) Memory: 0.6022 MB (Peak: 0.6352 MB) Data Comp: Off Server Time: 2026-06-13 00:50:39 UTC
Valid HTML 5 and Valid CSS